sff optical transcei ver (HSFF-03-1311S) 155mb/s, duplex lc, +3.3v 1310nm fp, 2x5 sff shenzhen hi-optel technology co., ltd. hi-optel building, bldg 2, gaofa technology park , longjing, nanshan district, shenzhen, china 518055 tel: +86-755-26753088 fax: +86-755-26753099 e-mail: info@hioptel.com http://www.hioptel.com page 1 of 4 issued date: 2008 - 3 - 27 features: ? small form factor 2x5 pin package ? duplex lc connector, 1310nm fp ? compliant with itu- t g. 957/958 ? single +3.3v power supply, lvpecl data interface ? compliant with telcordia gr-468-core ? class 1/1m laser product, compliant with iec825, fda21 cfr1040.10 and cfr1040.11 ? excellent emi & esd protection ? rohs compliant products available applications: ? sdh stm-1 ? sonet oc-03 ? fast ethernet ? atm and other optical data transmission description: hi-optel?s HSFF-03-1311S sff transceive r is a high performance, cost effect ive module for serial telecom and datacom applications, all versions are compliant with sonet/sdh recommendations from oc-03 specifications. this module is designed for single-mode fiber and operates at the wavelength of 1310nm. the transmitter section incorporates fp and driver ic with temperature compensation and automatic power control circuit. the receiver section incorporates an efficient ingaas/inp pin photodiode and transimpedance with agc for wide dynamic range. a lvpecl data interface simplifies interface to external circuitry. it is packaged in a small form factor multisourced 2x5 pin metal housing for excellent emi shielding. the transceiver has excellent immunity and reliability. specification: z electrical and optical characteristics: (condition: t a =t op ) transmitter section: parameter symbol min. typical max. unit data rate b - 155 - mb/s centre wavelength c 1296 1310 1330 nm output spectral width (rms) - - 4 nm average output power p o -5 - 0 dbm extinction ratio e.r. 10 - - db output optical eye compliant with itu-t g.957 rise/fall time (10%/90% peak) tr/tf - - 3.0 ns disable input voltage-high v h 2.0 - - v disable input voltage-low v l - - 0.8 v
sff optical transcei ver (HSFF-03-1311S) 155mb/s, duplex lc, +3.3v 1310nm fp, 2x5 sff shenzhen hi-optel technology co., ltd. hi-optel building, bldg 2, gaofa technology park , longjing, nanshan district, shenzhen, china 518055 tel: +86-755-26753088 fax: +86-755-26753099 e-mail: info@hioptel.com http://www.hioptel.com page 2 of 4 issued date: 2008 - 3 - 27 disable output optical power -- - - -40 dbm supply current i cc - - 120 ma receiver section: parameter symbol min. typical max. unit data rate b - 155 - mb/s data output voltage-high v h vcc-1.03 - vcc-0.89 v data output voltage-low v l vcc-1.82 - vcc-1.63 v sd output voltage-high v h vcc-1.03 - vcc-0.89 v sd output voltage-low v l vcc-1.82 - vcc-1.63 v receiver sensitivity (ber=1e-12 for a 2 7 -1 prbs) sen - - -36 dbm operating optical wavelength 1100 - 1600 nm signal detect assert p h l - - -37 dbm signal detect deassert p l h -47 - - dbm signal detect hysteresis 1.0 - - dbm supply current i cc - - 100 ma z absolute maximum ratings: parameter symbol min. max. unit storage temperature t st -40 +85 operating temperature t ip 0 +70 supply voltage v cc 0 +3.6 v input voltage v in 0 v cc v output current i o 0 30 ma soldering temperature & time - - 260/10 /s z recommended operating environment: parameter symbol min. typical max. unit supply voltage v cc +3.1 +3.3 +3.5 v operating temperature t op 0 - +70 pin assignment: (top view)
sff optical transcei ver (HSFF-03-1311S) 155mb/s, duplex lc, +3.3v 1310nm fp, 2x5 sff shenzhen hi-optel technology co., ltd. hi-optel building, bldg 2, gaofa technology park , longjing, nanshan district, shenzhen, china 518055 tel: +86-755-26753088 fax: +86-755-26753099 e-mail: info@hioptel.com http://www.hioptel.com page 3 of 4 issued date: 2008 - 3 - 27 pin signal name description mount studs and solder post mounting stud assembling the transceiver to pcb ground connecting to date ground plane receiver section 1 veer receiver power ground 2 vccr receiver power supply 3 sd signal detect output(lvpecl/lvttl), low logical level indicates loss of signal 4 rd- negative receiver signal output (lvpecl). 5 rd+ positive receiver signal output (lvpecl). transmitter section 6 vcct transmitter power supply 7 veet transmitter power ground 8 txdisable transmitter disable(lvttl), high logical level indicates transmitter is disabled 9 td+ positive transmitter da ta input (lvpecl). 10 td- negative transmitter data input (lvpecl). recommended circuit:
sff optical transcei ver (HSFF-03-1311S) 155mb/s, duplex lc, +3.3v 1310nm fp, 2x5 sff shenzhen hi-optel technology co., ltd. hi-optel building, bldg 2, gaofa technology park , longjing, nanshan district, shenzhen, china 518055 tel: +86-755-26753088 fax: +86-755-26753099 e-mail: info@hioptel.com http://www.hioptel.com page 4 of 4 issued date: 2008 - 3 - 27 mechanical dimensions:
|
